Product Introduction
N-type condensate pump is used to transport condensate water with a temperature below 120 ℃ or liquids with physical and chemical properties similar to clean water, suitable for use in thermal power plant units
Performance range
| Flow rate | 8—120m³/h |
| Lift | 37.7—143m |
| Motor power | 5.5—75KW |
| Product standard | JB/T6536-92 |
The N series condensate pump is a single-stage single suction cantilever centrifugal condensate pump, mainly used for transporting condensate water in thermal power plants
Main features
Structural design:
Mainly composed of pump body, impeller, shaft, suspension, and pump cover.
The shaft seal adopts soft packing sealing, and the bearing is a cantilever bracket bearing equipped with two rolling bearings.
The pump is driven by an electric motor through an elastic coupling and rotates counterclockwise when viewed from the transmission direction.
The suction and discharge interfaces are located on the pump barrel and discharge seat respectively, and are arranged horizontally at 180 ℃ (can be adjusted by multiples of 15 °)
The pump rotor shaft system consists of two shafts, which are connected by a snap ring cylinder coupling. The pump is connected by an elastic pin coupling or a rigid coupling.
Performance characteristics:
The flow range is 5-137m ³/h, and the head range is 22-170m
The efficiency is between 35% and 70%, the pump weight is 40-280KG, and the motor power is 3-75KW.
Some models, such as 100N130 and 150N110 pumps, can transport liquids up to 120 ℃, while other pumps cannot transport liquids at temperatures exceeding 80 ℃.
The inlet pressure of the pump shall not exceed 0.6Mpa.
Has good suction performance, and the axial load of the rotor can be borne by the pump's own thrust bearing or motor.
Application areas:
Widely used in thermal power plants for pumping condensed water from condensers.
Suitable for pumping condensate water from 750-3000KW steam turbine generator sets.
Can be used to transport other liquids with physical and chemical properties similar to water.
Can be used in metallurgy, petroleum, chemical and other fields, as well as for liquid pumping in closed containers that require high vacuum requirements.
Suitable for medium-sized irrigation areas in hills and plateaus, as well as for factories, mines, urban water supply and drainage.
Factory scene
FAQ
Can you accept small quantities?
Yes, accept small quantity, fast delivery
Do you have pre-shipment inspection procedures?
Yes, we always test the products before delivery.
Can I take samples for testing?
Yes, samples can be sent for testing before bulk ordering.
When is the delivery time?
Inventory orders within 7-15 days, for oem and odm orders, the specific time depends on the actual situation.
N series condensate pump
Contact Us
Classification
Keywords
Related Products
LXL Series Two Phase Flow Pumps
GC series boiler feed water pump
IH series chemical centrifugal pump
Add:Nanyang Industrial Zone, Anguo City, Baoding City, Hebei Province, China
Tel:+86-13833296368
Quote Now
Solutions for Your Industry, Ready for Your Choice